FLOOR STRIPPER removes synthetic finishes and natural waxes on first application.
FLOOR STRIPPER removes synthetic finishes (ECOLOGO® or traditional) and natural waxes on first application. Stripping floors comes easy due to its strong wetting, penetrating, emulsifying and suspending characteristics.
Its low odor and efficient formulation makes it an essential solution to any high-quality floor care program.
| Appearance | Clear liquid |
|---|---|
| Color | Yellow |
| Foam | No |
| Odor | Low odour |
| pH | 10.0-11.0 |
1. Remove debris then dust mop entire surface to be stripped.
2. Dilute FLOOR STRIPPER at 32 oz per US gallon of cold water (250 ml/liter) (1:4). Apply diluted solution to an area approximately 10ft x 10ft and allow 10 minutes for FLOOR STRIPPER to liquify existing layers of floor finish. Do not permit floor stripper to dry on floor.
3. Scrub thoroughly with a floor machine and stripping pad.
4. Pick up the solution with a wet-vac or auto-scrubber.
5. Rinse floor with Neutral Clean as per label instructions, or mop and rinse the floor twice with cold water.
6. After floor is dry, inspect to ensure all floor finish is completely removed.
7. Apply a finish such as Project Clean zinc-free floor finish.
