Disinfection of hospitals, food processing establishment, dairies, restaurants & bars:
Thoroughly pre-clean all surfaces and rinse with water. Dilute 5.5 mL of SAVALL per litre (1:180) of water. Apply this 550 ppm solution with a mop, cloth, sponge or trigger sprayer so as to wet all surfaces thoroughly. Allow to remain wet for 10 minutes, then remove all excess liquid. Prepare a fresh solution for each use.
SAVALL is not to be used as a sterilant/high-level disinfectant on any surface or instrument that: (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to pre-clean or decontaminate critical or semi-critical medical devices prior to sterilization or high level disinfection.
Sanitization of previously cleaned, non-porous food contact surfaces:
Remove all food particles and soil from areas which are to be sanitized, pre-flush, pre-soak or pre-scrape. Rinse with potable water then sanitize using a 200 ppm active quaternary solution by adding 2 mL of SAVALL to 1 litre (1:500) of water.
To sanitize immobile items such as tanks, chopping blocks and countertop:
Flood area with 200 ppm active quaternary solution for at least 60 seconds making sure to wet all surfaces completely. Remove, drain the use solution from surface and air dry. Prepare a fresh solution daily or more frequently as soil is apparent.
To sanitize mobile items such as drinking glasses and eating utensils:
Immerse in a 200 ppm active quaternary solution for at least 60 seconds making sure to immerse completely. Remove, drain used solution from surface and air dry. Prepare fresh solution daily or more frequently as soil is apparent. When used for sanitization of previously cleaned food equipment or food contact items, limit the active quaternary to 200 ppm. NO POTABLE WATER RINSE IS REQUIRED. SAVALL is an effective sanitizer when diluted in water up to 750 ppm hardness (CaCO3).
Deodorization of garbage storage areas, empty garbage bins and cans and pet areas:
Thoroughly pre-clean all surfaces and rinse with water. Dilute 5.5 ml of SAVALL per litre (1:180) of water. Apply this 550 ppm solution with a mop, cloth, sponge or trigger sprayer so as to wet all surfaces thoroughly. Allow to remain wet for a period of 10 minutes, then remove all excess liquid. Prepare a fresh solution for each use.
SAVALL KILLS HIV-1 ON PRE-CLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVIOUSLY SOILED WITH
BLOOD/BODY FLUIDS in health care settings (hospitals, long-term care homes) or other settings in which there is an expected likelihood of soiling of inanimate surfaces/objects with blood or body fluids, and in which the surfaces/objects likely to be soiled with blood or body fluids can be associated with the potential transmission of Human Immunodeficiency Virus Type 1 (HIV-1).
Special Instructions for cleaning and decontamination against HIV-1 on surfaces/objects soiled with blood or body fluids:
• Personal protection: when handling items soiled with blood or body fluids, use disposable latex
gloves, gowns, masks, or eye coverings.
• Cleaning procedures: blood or body fluids must be thoroughly cleaned from surfaces and objects
before application of this product.
• Contact time/dilution: at a use dilution of 32 mL per 4 L water (800 ppm), Savall is effective
against HIV-1 in the presence of 5% blood serum with a 10 minute contact time.
• Disposal of infectious materials: Blood or other body fluids should be autoclaved and disposed of
according to local regulations for infectious waste disposal.
Efficacy tests have demonstrated that Savall is an effective Bactericide and Virucide in the
presence of organic soil (5% blood serum).