Directions for Use
AGITATE CONTAINER BEFORE USE
Preparation:
1. Completely remove existing floor finish with FLOOR STRIPPER.
2. Pick up spent solution with a mop or wet-vac, making sure solution does not dry.
3. Rinse floor with Neutral Clean as per label instructions, or mop and rinse the floor twice with cold water.
Application:
1. Use a clean finish mop. Pre-wet with water and wring out to conserve finish.
2. Apply up to 6 thin, even coats of FLOOR FINISH.
3. Allow 20 minutes average drying time between coats. Drying time will vary with thickness of film, type of floor and relative humidity.
Daily Maintenance:
Dust mop floor with treated dust mop. Damp mop or auto scrub with NEUTRAL CLEAN for best results.
TIP: FLOOR FINISH can be used without a sealer. On a porous fl oor it is benefi cial to apply additional coats
Applications
- Vinyl
- Composite
- PVC
- Linoleum
- Sheet vinyl
- Marmoleum
- Laminate
- Quarry tile
- Terrazzo
- Sealed Wood
- Marble
- Concrete