Directions for Use
Pre-Application:
Always sweep or dust mop hard floor surface thoroughly before cleaning. Do not use dust mops containing oil or silicone dust mop treatments.
General Cleaning:
Hard floors mopping:
Mix between 1 oz of HD FLOOR CLEAN per gallon (8 ml/litre) of cool or warm water in a mop bucket fitted with a wringer. Apply solution liberally onto the floor surface and scrub.
Hard floors auto scrubbing:
If used as a daily floor cleaner in an automatic scrubber, dilute between 1-0.5oz of HD FLOOR CLEAN per gallon of cool water (8-4ml/litre). Scrub with an auto scrubber fitted with a white or red scrub pad.
Deep Cleaning prior to burnishing, restoring or recoating:
Hard floors auto scrubbing:
Mix between 1-2 oz of HD FLOOR CLEAN per gallon of cool water (8-16ml/litre). Scrub with an auto scrubber fitted with a red or blue scrub pad using light to moderate pad pressure depending on soil conditions.
Hard floor mopping:
Mix between 1-2oz of HD FLOOR CLEAN per gallon of cool or warm water in a mop bucket fitted with a wringer (8-16ml/litre). Apply solution liberally onto the floor surface and scrub using a 175-200 rpm floor swing machine equipped with a blue or pre-burnish floor pad. After scrubbing the solution should be picked up with a wet-vac and rinsed thoroughly before applying finish or restorers.
APPLICATIONS
- Vinyl composite
- PVC
- Linoleum
- Sheet vinyl
- Marmoleum
- Quarry tile
- Terrazzo
- Concrete
- Marble
