Directions for Use
Pre-Application:
Always sweep or dust mop hard floor surface thoroughly before cleaning. Do not use dust mops containing oil or silicone dust mop treatments.
General Cleaning:
Hard floors mopping:
Mix between 8 ml of HD FLOOR CLEAN per litre (1 oz/gal) of cool or warm water in a mop bucket fitted with a wringer. Apply solution liberally onto the floor surface and scrub.
Hard floors auto scrubbing:
If used as a daily floor cleaner in an automatic scrubber, dilute between 8-4 ml of HD FLOOR CLEAN per litre (1-0.5 oz/gal) of cool water. Scrub with an auto scrubber fitted with a white or red scrub pad.
Deep Cleaning prior to burnishing, restoring or recoating:
Hard floors auto scrubbing:
Mix between 8-16 ml of HD FLOOR CLEAN per litre (1-2 oz/gal) of cool water. Scrub with an auto scrubber fitted with a red or blue scrub pad using light to moderate pad pressure depending on soil conditions.
Hard floor mopping:
Mix between 8-16 ml of HD FLOOR CLEAN per litre (1-2 oz/gal) of cool or warm water in a mop bucket fitted with a wringer. Apply solution liberally onto the floor surface and scrub using a 175-200 rpm floor swing machine equipped with a blue or pre-burnish floor pad. After scrubbing the solution should be picked up with a wet-vac and rinsed thoroughly before applying finish or restorers.
APPLICATIONS
- Vinyl composite
- Linoleum
- Sheet vinyl
- Marmoleum
- Quarry tile
- Terrazzo
- Concrete
- Marble
