Oxygenic

Ecologo® certified peroxide-based disinfectant Biodegradable

OXYGENIC was developed to combine the power of peroxide with biodegradable emulsifying detergents to
provide fantastic cleaning and deodorizing results.

Packaging Variation

Manufacturer code UPC Size 1300830-4cs 841728100739 4 x 3.78L

Certifcations

Production Specifications

OXYGENIC was developed to combine the power of peroxide with biodegradable emulsifying detergents to provide fantastic cleaning and deodorizing results. OXYGENIC uses the proven power of peroxide to brighten and deodorize a variety of surfaces. It can be used for canvas cleaning and to remove moss. Economical in use, its unique blend of detergents penetrates and emulsifies grease, grime and dirt.

Appearance

Clear liquid

Colour

Colourless

Foam

Moderate

Odour

Citrus

pH

5.5-6.5

Directions for Use

Daily damp mop cleaning: Use 4-8ml per litre of cold water (½-1 oz./gallon) (1:128-1:256).

NOTE: BacStop mops are not recommended for use with this product.

General cleaning, deodorizing & glass cleaning: Use 8-16ml per litre of cold water (1-2 oz/gal) (1:128-1:64).
Cleaning & whitening ceiling tile & stippled ceilings: Mist on at 125 ml per litre of cold water (16 oz./gallon) (1:8). Be sure to cover everything below ceiling.
For general sanitizing of food contact hard surfaces: 1100 ppm active HYDROGEN PEROXIDE. Dilute 1 part OXYGENIC with 60 parts water. (16.5mL/litre)(2.1 fl. oz per US gal.) Let the surface remain wet for 10 minutes then rinse. Let the surface air dry.

Ensure surfaces are cleaned (i.e. organic matter and debris are removed) prior to sanitizing. A suitable concentration/ppm testing method must be available and used regularly to ensure correct sanitizer levels. Sanitized surface must be air-dried. All food should be removed or covered prior to use and food contact surfaces are to be thoroughly rinsed with potable water so there will be no contamination of food as a result of its use.

General Disinfection: Apply 75ml of OXYGENIC per litre of water to hard, inanimate, non-porous surfaces, thoroughly wetting surfaces as recommended and required, with a cloth, mop, sponge or sprayer. Let surface remain wet for at least 10 minutes then rinse. Let surface air dry. OXYGENIC is not to be used as a sterilant/high-level disinfectant on any surface or instrument that: (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to pre-clean or decontaminate critical or semi-critical medical devices prior to sterilization or high-level disinfection. Ensure concentration of 5000 ppm hydrogen peroxide using a test strip before using a diluted solution that was not immediately mixed.

Connect with a Distributor

Ready to place an order? Through our partnerships across Canada and the USA, we are here to serve you. Contact us directly to work with one of our team members or to find a distributor near you.

Find a distributor