Directions for Use
Unheated tap water should be used for dilution.
General cleaning, deodorizing and glass cleaning: Use 8-16 ml per litre of cold water 1-2 oz/gal).
Daily damp mopping: Use 4-8 ml z per litre of cold water (0.5-1 oz/gal) (1:256-1:128).
Hard surface disinfectant/sanitizer: For heavily soiled surfaces, a pre-cleaning step is required. Use 75 ml per litre of cold water (9.6 fl. oz/gal)(l:13) (5000 ppm). Spray or mop product onto surfaces. Allow surface to remain wet for 10 minutes. Then rinse.
FOR USE IN FOOD PLANTS: Avoid contamination of food during application and storage. All food should be removed or covered prior to use and food contact surfaces are to be thoroughly rinsed with potable water so there will be no contamination of food as a result of its use
FOR USE IN HOSPITALS: This product is not to be used as a sterilant/high-level disinfectant on any surface or instrument that: (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to pre-clean or decontaminate critical or semi-critical medical devices prior to sterilization or high-level disinfection.
APPLICATIONS:
- Stainless Steel
- Walls
- Countertops
- Tiles
- Hard surfaces
- Appliances
- Classroom equipment
- Touch points
- Floors
- Washroom surfaces
