Directions for Use
Unheated tap water should be used for dilution.
General cleaning and pre-cleaning:
Hard surfaces such as stainless steel, walls, toilets, countertops: Fill spray bottle or bucket with BIODEGRADABLE DISINFECTANT at 16 ml per litre of cold water (2 oz/gallon) (1:64). Apply and clean surface with damp microfiber cloth.
Hard floors mopping: Fill mop bucket with BIODEGRADABLE DISINFECTANT at 4-8 ml per litre of cold water (0.5-1 oz/gallon) (1:256-1:128). Apply and clean floor with damp mop.
Hard floors auto scrubbing: Fill auto scrubber with BIODEGRADABLE DISINFECTANT at 4 ml per litre of cold water (0.5 oz/gallon) (1:256). Clean floor with auto scrubber.
Hard surfaces such as stainless steel, walls, high touch points, toilets, countertops: Fill spray bottle or bucket with BIODEGRADABLE DISINFECTANT at 72 ml per litre of cold water (9 oz/gallon) (1:13). Apply to clean surface with sprayer or damp microfiber cloth. Allow to remain wet for 10 minutes and air dry.
FOR USE IN HOSPITALS: This product is not to be used as a sterilant/high-level disinfectant on any surface or instrument that: (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to pre-clean or decontaminate critical or semi-critical medical devices prior to sterilization or high-level disinfection.
FOR USE IN FOOD PLANTS: Avoid contamination of food during application and storage. All food should be removed or covered prior to use and food contact surfaces are to be thoroughly rinsed with potable water so there will be no contamination of food as a result of its use.
- Stainless Steel
- Hard surfaces
- Classroom equipment
- Touch points
- Washroom surfaces