Blast: Promax

Preparation:  

Vacuum carpet thoroughly before beginning cleaning process. Pretreat spots as needed.  

Pre-spray all heavily soiled traffic lanes and brush in. Apply ready-to-use solution at the rate of 400 square feet per RTU gallon (10 square meters per RTU litre). Use a coarse spray and avoid over spraying onto surfaces not being cleaned. Allow a 5-10 minute dwell time. Do not allow carpet to dry. Extract with clean water and accelerate drying with airmovers as needed.  

Dilution Rates  
Carpet Extraction and Bonnet Cleaning:  
Dilute 150 ml of BLAST per 18.9 litres of cold water (5 oz/5 gal) (1:128).  

Traffic Lane Cleaning:  
Dilute 120 ml of BLAST per 3.78 litres of cold water (4 oz/ 1 gal) (1:32).  

Carpet Spotting:  
Dilute 60 ml of BLAST per 946 ml of cold water (2 oz/ 1 quart) (1:16). Agitation may speed up cleaning action. Pick up solution with an extractor, wet dry vacuum or a damp cloth. 

CAUTION:  
Before application, pretest for colorfastness in an inconspicuous area. Dilution may vary depending on soil conditions. Do not walk barefoot on wet carpet. 

APPLICATIONS:

• Hallways 
• Common areas 
• Walk off mats 
• High traffic areas 
• Spotting