Blast: Promax

Preparation:

Vacuum carpet thoroughly before beginning cleaning process.
Pretreat spots as needed.

Pre-spray all heavily soiled traffic lanes and brush in.
Apply ready-to-use solution at the rate of 400 square feet per RTU gallon (10 square meters per RTU litre).
Use a coarse spray and avoid over spraying onto surfaces not being cleaned.
Allow a 5-10 minute dwell time.
Do not allow carpet to dry.
Extract with clean water and accelerate drying with airmovers as needed.

Dilution Rates
Carpet Extraction and Bonnet Cleaning:
Dilute 150 ml of BLAST per 18.9 litres of cold water (5 oz/5 gal) (1:128).

Traffic Lane Cleaning:
Dilute 120 ml of BLAST per 3.78 litres of cold water (4 oz/ 1 gal) (1:32).

Carpet Spotting:
Dilute 60 ml of BLAST per 946 ml of cold water (2 oz/ 1 quart) (1:16).
Agitation may speed up cleaning action.
Pick up solution with an extractor, wet dry vacuum or a damp cloth.

CAUTION:
Before application, pretest for colorfastness in an inconspicuous area.
Dilution may vary depending on soil conditions.
Do not walk barefoot on wet carpet.

APPLICATIONS:

• Hallways
• Common areas
• Walk off mats
• High traffic areas
• Spotting