Max Shine: Promax

Durable floor finish Burnishable gloss

MAX SHINE is a water-based acrylic polyurethane floor finish with 20% solids.

Packaging Variation

Manufacturer code UPC Size 1300698-4cs 841728102863 4x 3.78L 1300698-18.9 841728102849 18.9L Pail

Production Specifications

MAX SHINE is a water-based acrylic polyurethane floor finish with 20 percent solids. MAX SHINE delivers a water clear gloss to bring out a floor’s natural beauty, with or without burnishing. It’s unique chemistry enables it to be applied in thin coats for maximum coverage. MAX SHINE can be applied on a variety of floors such as linoleum, marmoleum, vinyl, vinyl asbestos, tile, marble, concrete and sealed wood. It can be used alone or in conjunction with a high-quality sealer to enhance the protection of the floor. MAX SHINE provides a robust coating that allows a scrub and recoat process or is fully removable if required.




Opaque white




Mild, no added fragrance



Directions for Use

Covers up to 2500 square feet per gallon minimum depending on application method and porosity of floor. 

General Application: 

  1. Completely strip old floor finish with a floor finish remover such as FINISH REMOVER or #1 REMOVER
  1. Remove the stripping solution and rinse floor with a neutral pH cleaner such as NEUTRAPOWER and NEUTRAL CLEAN or follow with two to three clear water rinses. Allow to dry.
  1. Apply MAX SHINE in a uniform, thin coat with either fine string mop or finish applicator. Allow finish to dry thoroughly for 20- 30 minutes depending upon the surrounding air flow, temperature and humidity. Do not apply additional coats until surface is dry to the touch. 
  1. Apply additional coats following the same techniques. Applying three to five coats is optimum.

General Maintenance: 

  1. Dust mop or sweep floor as necessary with a clean dust mop.
  1. Damp mop using a neutral pH floor cleaner such as NEUTRAL CLEAN or NEUTRAPOWER.
  1. High traffic areas can be quickly repaired between finish applications by using a mop on restorer like ARMOR-ACE, MAXICOAT or FLOOR FINISH 18. High traffic lanes can be recoated as needed.
  1. Heavily soiled areas can be machine scrubbed using HD FLOOR CLEANER at the recommended dilutions and the appropriate floor scrubbing pad.

TIP: A sealer is not required, but if you have an old, worn or fairly porous floor, consider applying HOLDOUT or FLOOR SEALER. One or two sealer coats are sufficient. 


  • Resilient flooring
  • Terrazzo
  • Concrete

Contacts Us

Ready to place an order? Through our partnerships across Canada and the USA, we are here to serve you. Contact us directly to work with one of our team members or to find a distributor near you.

Contact Us