Directions for Use
Unheated tap water should be used for dilution.
Hard surfaces such as stainless steel, walls, countertops: Fill spray bottle or bucket with ALL CLEAN NATURAL at 16-24 ml per litre of unheated tap water (2-3 oz/gallon) (1:64-1:42). Apply and clean surface with damp microfiber cloth.
Hard floors mopping: Fill mop bucket with ALL CLEAN NATURAL at 16-24 ml per litre of unheated tap water (2-3 oz/gallon) (1:64-1:42). Apply and clean floor with damp mop.
Hard floors auto scrubbing: Fill auto scrubber with ALL CLEAN NATURAL at 4 ml per litre of unheated tap water (0.5 oz/gallon) (1:256). Clean floor with auto scrubber.
Periodic deep cleaning:
Heavy duty and machine cleaning: Fill mop bucket with ALL CLEAN NATURAL at 32-48 ml per litre of cold water (4-6 oz/gallon) (1:32-1:21). Apply cleaning solution to floor, allow 10-12 minute dwell time, scrub with floor machine, pick up slurry with wet vacuum and rinse.
FOR USE IN FOOD PLANTS: All food should be removed or covered prior to use and food contact surfaces are to be thoroughly rinsed with potable water so there will be no contamination of food as a result of its use.
• Stainless Steel
• Hard surfaces
• Classroom equipment
• Pressure washer
• Touch points pre-clean
• Sinks and faucets