Foundation: Promax

Multi-surface floor finish High gloss

FOUNDATION provides maximum gloss and durability to extend the life and improve the appearance of floors with little maintenance. 

Packaging Variation

Manufacturer code UPC Size 1300543-4cs 00841728111360 4 x 3.78L 1300543-18.9 00841728111339 18.9L

Production Specifications

FOUNDATION provides maximum gloss and durability to extend the life and improve the appearance of floors with little maintenance. Its superior scratch, scuff and blackmark resistance is a result of a high-performance blend of tough, hard and flexible polymers. Its plasticized ingredients give excellent burnish response and can be used with or without a sealer.  

FOUNDATION’s fast drying formulation builds gloss quickly and responds with unmatched brilliance to burnishing by 1000 to 3000 rpm machines. However, burnishing is not required to maintain its high gloss and outstanding appearance. FOUNDATION achieves levels of hardness and clarity far superior to conventional finishes. 




Opaque white




Mild, no added fragrance



Directions for Use

Covers up to 3000 square feet per gallon minimum depending on application method and porosity of floor. 

General Application: 

  1. Completely strip all old wax or finish with a finish remover such as #1 REMOVER or FINISH REMOVER.
  2. Remove the stripping solution and follow with one or two clear-water rinses. Allow floor to dry.
  3. For extra durability, two coats of FLOOR SEALER or HOLDOUT can be applied but is not required.
  4. Apply FOUNDATION in a uniform, thin coat. Let dry thoroughly for 20 to 30 minutes depending upon the surrounding air flow, temperature and humidity. Do not apply additional coats until surface is dry to the touch. Apply additional coats following the same techniques. Applying three to five coats is optimum.

General Maintenance: 

  1. Dust mop or sweep floor as necessary with a clean dust mop.
  2. Damp mop using a neutral pH floor cleaner such as NEUTRAL CLEAN or NEUTRAPOWER.
  3. High traffic areas can be quickly repaired between finish applications by using a mop on restorer like ARMOR-ACE, MAXICOAT or FLOOR FINISH 18. High traffic lanes can be recoated as needed.
  4. Heavily soiled areas can be machine scrubbed using HD FLOOR CLEAN at the recommended dilutions and appropriate floor scrubbing pad.

TIP: A sealer is not required, but if you have an old, worn or fairly porous floor, consider applying HOLDOUT or FLOOR SEALER. One or two sealer coats are sufficient. 


  • Resilient flooring
  • Stone flooring
  • Concrete

Contacts Us

Ready to place an order? Through our partnerships across Canada and the USA, we are here to serve you. Contact us directly to work with one of our team members or to find a distributor near you.

Contact Us