Maxicoat

General Application:
Hard floor auto scrubbing:

1. Add 4 oz. of MAXICOAT per each gallon of cold water in solution tank (32ml/litre) (1:32).
2. Once floor has been properly swept, scrub the floor using a conventional “one pass” method. Use white or red pads with light pad pressure to avoid rubbing away finish.
3. Mop up solution behind machine immediately.
4. Let the floor thoroughly dry. Burnishing is optional. To obtain maximum overall gloss burnishing is recommended.
5. To remove deeply embedded dirt use HD FLOOR CLEAN according to label directions.

Hard floor mop on:

1. Add 2 oz. of MAXICOAT per each gallon of cold water in the mop bucket (16ml/litre)(1:64). (2 oz/gal) (1:64)
2. Apply MAXICOAT solution liberally to the floor area being cleaned.
3. Mop up soil and excess cleaner with a tightly wrung out cleaning mop.
4. Let the floor thoroughly dry. To obtain maximum gloss burnish with a high-speed machine.

To remove deeply embedded dirt use HD FLOOR CLEAN according to label directions.

APPLICATIONS

• Vinyl composite
• PVC
• Linoleum
• Sheet vinyl
• Marmoleum
• Quarry tile
• Terrazzo
• Concrete
• Marble