Directions for Use
Covers up to 3000 square feet per gallon minimum depending on application method and porosity of floor.
General Application:
- Completely strip old floor finish with a floor finish remover such as FINISH REMOVER or #1 REMOVER.
- Remove the stripping solution and rinse floor with a neutral pH cleaner such as NEUTRAPOWER and NEUTRAL CLEAN or follow with two to three clear water rinses.
Allow to dry.
- Apply SHEERGLOSS in a uniform, thin coat with either fine string mop or finish applicator.
Allow finish to dry thoroughly for 20- 30 minutes depending upon the surrounding air flow, temperature and humidity.
Do not apply additional coats until surface is dry to the touch.
- Apply additional coats following the same techniques.
Applying four to five coats is optimum. More may be required if you have an un-sealed, porous floor or need a good base to propane burnish.
General Maintenance:
- Dust mop or sweep floor as necessary with a clean dust mop.
- Damp mop using a neutral pH floor cleaner such as NEUTRAL CLEAN or NEUTRAPOWER
- High traffic areas can be quickly repaired between finish applications by using a mop on restorer like ARMOR-ACE, MAXICOAT or FLOOR FINISH 18.
High traffic lanes can be recoated as needed.
- Heavily soiled areas can be machine scrubbed using HD FLOOR CLEAN at the recommended dilutions and the appropriate floor scrubbing pad.
- Spray buff or burnish as desired.
TIP: A sealer is not required, but if you have an old, worn or fairly porous floor, consider applying HOLDOUT or FLOOR SEALER.
One or two sealer coats are sufficient.
APPLICATIONS
- Resilient flooring
- Terrazzo
- Concrete
